CRITICARE CSI 8100

Vital Signs Monitor

• Features:
• Standard: ECG, ComfortCuff™ NIBP, DOX™ SpO2, HR, Temperature, Respiration, and Nurse Call interface connection.
• Optional: CO2, CO2/O2, IBP (2 channel), and printer.

Specifications

ECG
Connectors: 3- or 5-lead
Leads: User-selectable; I, II, III, aVR, aVL, aVF, V (5-lead); I, II, or III (3-lead)
Gain Selection: 1/2mV, 2mV, 4mV
Frequency Response: Diagnostic: 0.05 to 100 Hz (-3db); Monitor: 0.5 to 40 Hz (-3db)
Sweep Speed: 12.5, 25, 50mm/sec
Electrosurgery Protection: Yes
Defibrillator Protection: Yes
Pacer Detection/Rejection: Yes
Non-Invasive Blood Pressure
Technique: Oscillometric measure upon inflation
Automatic Measurement Cycles: 2, 3, 5, 10, 15, 30 min; 1, 2, 4 hr
Measurement Range: Adult: 30 to 300mmHg; Neonate: 0 to 150 mmHg
Resolution: 1mmHg
Transducer Accuracy: ±2mmHg or ±2% of reading, which ever is greater, over full range
STAT mode: 5 min of consecutive readings
Pulse Oximetry
Range: 1% to 99%
Resolution: 1%
Accuracy: 70% to 99% range: ±2%; 50% to 69% range: ±3%; <50%: unspecified
Method: Dual wavelength LED
Heart (Pulse) Rate
Source: ECG (primary); IBP, Pleth; NIBP
Range: 20 to 300bpm
Accuracy: ±1bpm or ±1% (ECG, IBP, SPO2 only)
Temperature
Channels: 2
Range, Accuracy: 68° to 94.8° F (20° to 34.9° C): ±0.5%; 95° to 107.4° F (35° to 41.9° C): ±0.2%; 107.6° to 113° F (42° to 45° C): ±0.5%
Probe: YSI-400 and YSI-700 series
Respiration
Rate: 6 to 150 breaths/min
Resolution: 1 breath/min
Accuracy: ±1% or ±1 breath/min, whichever is greater
Source: User selectable: Smart, CO2, ECG-TTI
CO2
Units: mmHg; Torr; %; kPa
Waveform Scale: 0 to 3.13%, 0 to 6.25%, 0 to 12.5% and 0 to 25%
Method: Non-dispersive infrared; autocalibrating
N2O Compensation: Manual; On/Off, user selectable
Range: 0 to 99mmHg; 0 to 99 Torr; 0 to 12.5%; 0 to 12.5 kPa
Resolution: 1mmHg; 1 Torr; 0.1%; 0.1 kPa
Sample Rate: Sidestream, selectable: 150ml/min or 50ml/min
Accuracy: +2mmHg, ±0.3 volume %, ±0.3 kPa, or ±2 Torr at 150ml/min and respiratory rate of ±35 breaths/min
Rise Time: 350ms at 150ml/min (10 to 90%)
O2
Numeric Display: Inspired, expired Method: Oxidation-reduction galvanic cell
Resolution: 1%
Range: 0 to 100%
Accuracy: ±3% volume %
Rise Time: 600ms at 150ml/min (10 to 90%)
Invasive Blood Pressure
Channels: 2
Transducer Sites: Selectable; ART, PA, LA, RA, CVP, ICP
Zero Offset: ±150mmHg
Frequency Response: 0 to 20 Hz
Transducer Sensitivity: 5µV/V/mmHg
Zero: Menu-driven
Accuracy: ±1mmHg or ±1%, whichever is greater
Scale Range: -10 to 10, 0 to20, 0 to 30, 0 to 40, 0 to 60, 0 to 100, 0 to 150, 0 to 200, 0 to 300
Alarms
Indication: Audible; visual (EN475)
Silence: Yes; 2 min or permanent
Trend Memory
Tabular: 24 hr at 30 sec intervals
Display
Screen: 10.4" active color TFT
Resolution: 640 x 480 pixels
Waveforms: 6, maximum
Languages: English, French, German, Italian, Portuguese, Spanish
Controls
Keys: 9; membrane-activated
Rotary Knob: Push and rotate; 24 steps/turn
System Outputs
Com Ports: RS 232-compatible; digital or analog; DB9 (Com 1); mini-din analog (Com 2)
Nurse Call: Contact switch; 3.5mm stereo phone jack, standard 14mm length
Defib/Sync: BNC connector
Video Port: High density D-sub 15-pin
Recorder
Type: Thermal line printer
Paper Speed: 12.5, 25, 50mm/sec
Mechanical
Weight: Base unit without batteries: 12 lb; 5.45kg
Size: Base unit: 13.25" (H) x 12.5" (W) x 8.75" (D); 33.65cm (H) x 31.75cm (W) x 22.22cm (D)
Power Requirements
Voltage: 100, 120, 220, 240 VAC; 50/60 Hz
Consumption: 35 W, typical
Batteries: 2; sealed lead acid; life: 2 hr, typical; recharge time: 4.5 hr
(Base unit without printer or CO2)